Specifications (MFG catalog & Actual Check)
|Fender Japan MIJ E Serial Fujigen made Stratocaster 57
Well, proper condition E serial 57 model.
Maybe made in 1987 from the serial.
It should be all original specification.
The PU is Fender Japan original.
The neck is 1P maple and straight with standard C grip. The frets are a little bit worn.
It is still O.K. for playing. The nut width is 42.2 mm.
The electric circuit are fine. I'm not sure about the body material.
Fender Japan mixed body materials basswood or alder 3P.
It is 3.6 Kg weight.
There are scratches by pick around the pick guard. You can see it on the photo.
Maybe, if you polish by compound, then it will be fnbe again. But this is vintage guitar.
It is up to you...
I have changed the inertia block to original to our steel made block.
The original block is zinc die-cast made. Our steel block is completely different.
It made much heavy tone and long sustain. You could feel it.
This block also could accept the our special designed mufti-function Tremolo arm.
I just put it for testing tone.
We could deliver the original zinc die-cast block.
I have also changed the output jack to switch craft with Belden wires for out put.
The neck plate has the Fender press marked on. This plate is used only for before 90 made?
Well, Good guitar ! Find out the good JV guitar!
Comments from Music-Trade.co.jp
|Nut Width (mm)||42.2|
|Repair||Output Jack to new one|
|Estimated shipping weight||8 Kg|
|Brand or Manufacturer||Fender Japan|
|Serial Number||MIJ E782xxx|
|Product Year (Estimated)||1987|
|Body Material||Ash or Basswood 3P|
|Neck Material||Maple 1P|
Code : 80000055